Gee Zero Three: Circular Interpolation – Anti-Clockwise
G03 Commands the machine to move in a circular motion rather than a straight line between two points.
Syntax:
G03 X*.* Z*.* R*.*
- X*.* being the finish point of the arc in the X axis
- Z*.* being the finish point of the arc in the Z axis
- R*.* being the radius of the arc required
Option: Alternative
G03 X*.* Z*.* I*.* K*.*
- X*.* being the finish point of the arc in the X axis
- Z*.* being the finish point of the arc in the Z axis
- I*.* being the distance from the arc start point to the arc centre point in the X axis
- K*.* being the distance from the arc start point to the arc centre point in the Z axis
G03 Is A Modal Command
